50.3. Connection on the Intra2net System

Create the VPN connection as described in Section 44.4, „Manual configuration on the Intra2net system“. Please note the following points:

  1. You must use an encryption profile without PFS.

  2. The tunnel is given Local Network with the setting Everything (0.0.0.0/0.0.0.0). The virtual IP on the peer side is assigned using mode-config.

  3. Activate the XAUTH server mode.

  4. Create a new user group under Usermanager > Groups and give it the right VPN authentication via XAUTH. Now add all users who should be able to connect from Android devices to this group.