HPE ProLiant ML30 Gen10 Plus
Configuration Proposal
| 1x | P44723-B21 | HPE ProLiant ML30 G10 Plus, Intel Xeon E-2314 QuadCore 2.8 GHz, 16 GB RAM, 2x LAN, backplane for 4x LFF (3.5") HDDs without carrier |
| 2x | 801882-B21 | 1 TB SATA-Festplatte 3.5" Non-Hot-Plug, LFF |
| 1x | P21106-B21 | I350-T4 4-port Gigabit network card, PCIe x4 |
Certified Models
| P44718-421 | 4x LFF (3.5") Non-Hot Plug Backplane für Festplatten ohne Träger |
| P44720-421 | 4x LFF (3.5") Hot Plug Backplane |
| P44722-421 | 8x SFF (2.5") Hot Plug Backplane |
Hinweis: das Gerät verfügt über keinen Lautsprecher. Beim Einsatz von RAID ist daher keine akustische Warnung bei Ausfall einer Festplatte möglich. Es wird daher der Einsatz eines Überwachungssystems empfohlen.
Memory Expansion
 |
P43019-B21 | 16 GB PC4-3200 ECC UDIMM Memory Expansion |
Certified network cards
|
P21106-B21 | I350-T4 4-port Gigabit network card, PCIe x4 |
Certified hard disks and SSDs
|
801882-B21 | 1 TB SATA hard disk 3.5" non-hot-plug, without HDD carrier |
|
801888-B21 | 4 TB SATA hard disk 3.5" non-hot-plug, without HDD carrier |
|
861686-B21 | 1 TB SATA hard disk 3.5" hot-plug, LFF LP carrier |
|
861681-B21 | 2 TB SATA hard disk 3.5" hot-plug, LFF LP carrier | |
861683-B21 | 4 TB SATA hard disk 3.5" hot-plug, LFF LP carrier | |
P40503-B21 | 960 GB SATA-SSD 2.5" Hot-Plug, SFF Basic Carrier | |
P40504-B21 | 1.92 TB SATA-SSD 2.5" Hot-Plug, SFF Basic Carrier |
Hinweis: Achten Sie darauf, dass Festplatte und Träger zur Backplane des Servers passen (siehe oben).
BIOS Settings
For correct operation, the following settings must be configured in the BIOS setup:
|
System Configuration > BIOS/Platform Configuration > System Options > Server Availability Automatic Power-On : Always Power On |
|
System Configuration > BIOS/Platform Configuration > Processor Options Processor x2APIC Support : Disabled |
|
System Configuration > BIOS/Platform Configuration > Boot Options Boot Mode : UEFI Mode |
|
System Configuration > BIOS/Platform Configuration > Storage Options > SATA Controller Options Embedded SATA Configuration : SATA AHCI Support |
|
System Configuration > BIOS/Platform Configuration > Server Security Secure Boot Settings > Attempt Secure Boot : Disabled |
Back to HPE Server Overview