HPE ProLiant MicroServer Gen10 Plus

Configuration Proposal

1x	P16005-421	HPE ProLiant MicroServer G10 Plus, Intel Pentium Gold G5420 dual core 3.8 GHz, 8 GB RAM, 4x LAN, enclosure for 4x 3.5" SATA HDDs
1x	801882-B21	1 TB SATA hard disk 3.5" non-hot-plug, without HDD carrier

Note: The device does not have a loudspeaker. When using RAID, it is therefore not possible to receive an acoustic warning if a hard disk fails. The use of a monitoring system is therefore recommended.

Memory Expansion

	879505-B21	8 GB PC4-2666 ECC UDIMM Memory Expansion
	879507-B21	16 GB PC4-2666 ECC UDIMM Memory Expansion

Certified Hard Drives

	801882-B21	1 TB SATA hard disk 3.5" non-hot-plug, without HDD carrier
	801888-B21	4 TB SATA hard disk 3.5" non-hot-plug, without HDD carrier

More options

	P13788-B21	HPE iLO Remote Maintenance Module
	870213-B21	Drive adapter for mounting 2.5" SATA hard drives and SSDs

BIOS Settings

For correct operation, the following settings must be configured in the BIOS setup:

	System Configuration > BIOS/Platform Configuration > System Options > Server Availability Automatic Power-On : Always Power On
	System Configuration > BIOS/Platform Configuration > Processor Options Processor x2APIC Support : Disabled
	System Configuration > BIOS/Platform Configuration > Boot Options Boot Mode : UEFI
	System Configuration > BIOS/Platform Configuration > Server Security Secure Boot Settings > Attempt Secure Boot : Disabled