HP Proliant ML310e G8v2
Configuration Proposal
| 1x | 724160-045 | HP ML310e G8v2, Intel Xeon E3-1220v3 QuadCore, 4 GB RAM, 1x 1 TB SATA hard drive, 2x LAN, DVD-ROM |
| 1x | 657750-B21 | 1 TB SATA hard disk 3.5" non-hot plug, HP SmartDrive bracket (possibly also available at a lower price under order no. 657750-TV1) |
Certified Models
724160-045, 712327-421, 712329-421, 712328-041, 712329-041, 712328-421, 724160-425
Memory Expansion
 |
647905-B21 | 2 GB PC3L - 10600E UDIMM memory expansion |
|
647907-B21 | 4 GB PC3L - 10600E UDIMM memory expansion |
|
647909-B21 | 8 GB PC3L - 10600E UDIMM memory expansion |
Certified Network Cards
|
503746-B21 | NC112T Gigabit network card, PCIe x1 |
| 615732-B21 | 332T 2-port Gigabit network card, PCIe x1 |
Certified Hard Drives
|
657750-B21 | 1 TB SATA hard disk 3.5" non-hot plug, HP SmartDrive bracket |
|
658079-B21 | 2 TB SATA hard disk 3.5" non-hot plug, HP SmartDrive bracket |
Optical Drives
|
624189-B21 | HP DVD-ROM, SATA |
If you do not order an optical drive, a USB CDROM is required for the installation.
BIOS Settings
For correct operation, the following settings must be configured in the BIOS setup:
|
System Options > USB Options > USB Port Controller Routing > USB 2.0 Controller |
|
System Options > SATA Controller Options > Embedded SATA Configuration > Enable SATA AHCI Support |
|
System Options > SATA Controller Options > Drive Write Cache > Enabled Note: If the SATA configuration has been changed, this option only appears after restarting |
|
Server Availability > Automatic Power-On > Always Power On |
|
Advanced Options > Advanced System ROM Options > Virtual Install Disk > Disabled |
Back to HP Server Overview