HP Proliant ML310e G8

Configuration Proposal

1x	686141-045	HP ML310e G8, Intel Xeon E3-1220v2 QuadCore, 2 GB RAM, 1x 500 GB SATA hard drive, 2x LAN, DVD-ROM
1x	659341-B21	500 GB SATA non-hot-plug hard drive 3.5"
1x	647907-B21	4 GB PC3L - 10600E UDIMM memory expansion (possibly also available at a lower price under order no. 647907-TV1)

Certified Models

686141-045, 674786-421, 674787-421, 674785-421

 

Memory Expansion

	647905-B21	2 GB PC3L - 10600E UDIMM memory expansion
	647907-B21	4 GB PC3L - 10600E UDIMM memory expansion
	647909-B21	8 GB PC3L - 10600E UDIMM memory expansion

Certified Network Cards

	503746-B21	NC112T Gigabit network card, PCIe x1
	458492-B21	NC382T Dualport Gigabit Netzwerkkarte, PCIe x4
	615732-B21	332T 2-port Gigabit network card, PCIe x1

Certified Hard Drives

	659341-B21	500 GB SATA non-hot-plug hard drive 3.5"
	659337-B21	1 TB SATA non-hot-plug hard drive 3.5"
	659339-B21	2 TB SATA non-hot-plug hard drive 3.5"

Optical Drives

624189-B21

HP DVD-ROM, SATA

If you do not order an optical drive, a USB CDROM is required for the installation.

BIOS Settings

For correct operation, the following settings must be configured in the BIOS setup:

	System Options > SATA Controller Options > Embedded SATA Configuration > Enable SATA AHCI Support
	System Options > SATA Controller Options > Drive Write Cache > Enabled
	Server Availability > Automatic Power-On > Always Power On
	Advanced Options > Advanced System ROM Options > Virtual Install Disk > Disabled

Back to HP Server Overview