HP Server DL120 G7


HP Proliant DL120 G7

Suggested Configuration

1x 644706-425 HP Proliant DL120 G7, Intel Xeon E3-1220 3,1 GHz Quadcore,
4 GB unbuffered RAM, 2x Gigabit-NIC onboard
2x458928-B21 500 GB SATA Hard Drive Hot-Swap
1x503746-B21 NC112T Gigabit network card, PCIe x1

Certified Models

It is possible to assemble the server using the HP TopConfig configurator or to use the following complete devices:

644706-425, 628690-421, 628691-421, 628692-421

 

Memory Expansion

Maximum 4 unbuffered DDR3 ECC memory modules
500670-B21 2 GB unbuffered DDR3 ECC Memory expansion
500672-B21 4 GB unbuffered DDR3 ECC Memory expansion

Possible Network Cards

2 PCIe slots (x8), including one full height and one low profile
503746-B21 NC112T Gigabit network adapter, PCIe x1,
can be used in low-profile and full-height applications
458492-B21 NC382T Dual Port Gigabit Network Card, PCIe x4,
can be used in low-profile and full-height applications

Rack

Server height 1U
19"-Rackmount kit included, compatible with HP racks
If it cannot be installed in a rack by another manufacturer, we recommend the following universal installation kit: Racksolutions 1UKIT-109

Possible SATA Hard Drives

only HotSwap hard disks from HP have the necessary frames for the backplane
458928-B21 500 GB SATA Hard Drive Hot-Swap
454146-B21 1 TB SATA hard drive hot-swap
507632-B21 2 TB SATA hard drive hot-swap

Possible SAS/SATA controllers

2 SATA hard disks can also be connected without controller
462828-B21 HP SmartArray P212, without cache
491191-B21 HP SmartArray P212, 256 MB cache, battery buffered

Possible SAS Hard Drives

only HP hard disks have the necessary frames for the backplane
516814-B21 300 GB hard drive, SAS DP, 15.000 RPM
516816-B21 450 GB hard drive, SAS DP, 15.000 RPM
516828-B21 600 GB hard drive, SAS DP, 15.000 RPM

Optical Drives

481045-B21 HP Slimline DVD-ROM, SATA
481047-B21 HP Slimline DVD-RW, SATA

If you do not order an optical drive, a USB CDROM is required for the installation.


Back to HP Server Overview